Unity TunerInstruction ManualThis pedal is:
Step 1 - plug the guitar/bass into the tuner - see “connections” section.Step 2 - play a note on your guitar. Pluck your E string, if needed, adjust
Tuning Instructions - STROBE:The STROBE function of the UNITY Tuner is extremely senstive.Step 1 - plug the guitar/bass into the tuner and press the “
Calibration:To match the pitch of any instrument or audio source (like an old piano or tape player) press the “Calibrate” button while simultaneously
Hints and Tips:The Unity Tuner is sensitive, so it is not necessary to strike your string very hard. Standard string attack will work. Additionally,
SpecicationsMaximum InputMaximum OutputInput ImpedanceOutput ImpedanceCurrent ConsumptionPower RequirementsDimensionsWeight3.8dBu5.8dBu1MΩ100Ω15mA9V
How to change the battery:To change the battery, turn the pedal over and remove the 4 screws on the bottom. Remove the back cover. Carefully remove
Rocktron - A Division of GHS Corporation2813 Wilber AveBattle Creek MI [email protected]: 1-269-968-3351rev. 0607112011.1
Your Unity Tuner™ pedal has been tested and complies with the following Standards and Directives as set forth by the European Union:Council Directive(
Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions.Do not install near any heat source
Introduction:Congratulations on your purchase of the Rocktron Unity Tuner.The Unity Tuner is a true “on-stage” tuner for any gig. The Unity Tuner’s l
Descriptions
Descriptions continued...DISPLAY Window - This black window houses the LEDs and controls for the Unity TunerNOTE LED BANK - This bank of blue LE
Descriptions continued...CALIBRATE button - this button is used to calibrate the tuner to match the pitch of any instrument or audio source (lik
MUTED Connection
CONSTANT Connection
Comments to this Manuals