Rocktron Intellifex XL User Manual download pdf (Page 45)

Turn the PARAMETER ADJUST control to scroll through the available parameters for the

current configuration.

PARA1 XXX

Step 5

Turning the PARAMETER SELECT control one step clockwise will display the effect

parameter that is currently mapped to the NUMB1 control number.

PARA1 EFFECTS LVL

Step 6

After selecting the parameter to be assigned to the NUMB1 controller, press the STORE

button to save it. "STORED" will flash briefly on the display.

Step 7

STORED

The Intellifex allows for the range of any given parameter to be limited when using a

MIDI controller to determine the current parameter value. For example, if a given

parameter has a range from -

∞

to +6dB yet it is desirable for the full range of the

controller to vary from only -10dB to +2.5dB, a lower limit of -10 and an upper limit

of +2.5 may be set via the "Upper Limit" and "Lower Limit" parameters. When storing

a parameter, the maximum value is stored as the upper limit and the minimum value is

stored as the lower limit automatically.

NOTE

Turn the PARAMETER SELECT control to display the next parameter - "Controller Upper

Limit".

Step 8

ULIM C1 XXX

Use the PARAMETER ADJUST control to select the highest parameter value that the

controller is not to exceed.

Step 9

ULIM C1 +2.5

Step 10

After selecting the value for the upper limit, press the STORE button to save it. "STORED"

will again flash briefly on the display.

STORED

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

No comments

Rocktron Intellifex XL User Manual Page 45