Rocktron XCHANGE Specifications download pdf (Page 28)

To link loops in Stereo, follow these instructions

1. Turn the PatchMate LOOP 8 Floor "ON", then press and hold the STORE button down until the

STORE LED starts "ﬂashing". Note that this procedure must be done within 3 seconds of the PatchMate

LOOP 8 Floor being turned "ON"

2. Press SWITCH 7 (STEREO LINK), the LED above it will be lit.

3 SWITCHES 1, 2, 3 and 4 now become the STEREO LINK switches. When Switch 1 is pressed and

the LED is lit, LOOP 1 is now linked in stereo to LOOP 5 and Switch 1 now is the ON/OFF control over

the linked pair. The linked pairs are [ 1 to 5 ] [ 2 to 6 ] [ 3 to 7 ] [ 4 to 8 ].

4 PRESS and RELEASE the STORE SWITCH to execute the link.

After you have pressed the STORE SWITCH the PatchMate LOOP 8 Floor will return to the current

PRESET.

Stereo Link

1 2 ... 23 24 25 26 27 28 29 30 31 32

No comments

Rocktron XCHANGE Specifications Page 28