Rocktron Velocity 100 User Manual download pdf (Page 6)

Rear Panel

1 IN jack (Ch.2):

This ¼" jack provides an input to Channel 2 from the output of a preamp or the device in an

effects chain.

2 OUTPUTS jacks (Ch. 2):

These ¼" mono jacks provide outputs for Channel 2 to speaker cabinets. These jacks are

configured in parallel.

Important!

Do not use these outputs with loads of 2Ω or less. When using both

output jacks to provide multiple speakers for a given channel, it is

important to ensure that the combination of speaker impedances for the

given Velocity 100 output channel does not equate to a combined

impedance of 2Ω or less.

3 POWER module

This module provides a connection for the power cord and also houses the main fuse of the

unit. (For information about changing the fuse, please see page 5.)

4 OUTPUTS jacks (Ch. 1):

These ¼" mono jacks provide outputs for Channel 1 to speaker cabinets. These jacks are

configured in parallel.

Important!

Do not use these outputs with loads of 2Ω or less. When using both

output jacks to provide multiple speakers for a given channel, it is

important to ensure that the combination of speaker impedances for the

given Velocity 100 output channel does not equate to a combined

impedance of 2Ω or less.

5 IN jack (Ch.1):

This ¼" jack provides an input to Channel 1 from the output of a preamp or the device in an

effects chain.

1 2 3 4 5 6 7 8 9 10

No comments

Rocktron Velocity 100 User Manual Page 6