Rocktron MultiValve User Manual download pdf (Page 18)

Functions and Parameter Descriptions

The first function displayed when turning the FUNCTION SELECT control is the

Global function. The parameters provided in this function affect all presets (i.e. the

settings stored for these parameters are the same for all presets).

The PARAMETER SELECT control will allow you to access each of the following

Global parameters:

GLOBAL

Function

OUTPUT

HUSH OFFSET

MUTE

DIRECT

The OUTPUT parameter determines whether the output of the

MultiValve is a stereo (left and right) signal or two mono signals.

The HUSH OFFSET parameter allows you to globally (all presets)

adjust the HUSH

Expander Threshold. This means that if this param-

eter is altered from 0dB to +3dB, the Expander Threshold will be 3dB

higher for all presets. This feature can be useful when switching from a

quiet guitar with passive electronics to a noisy guitar with active

electronics - as the active guitar would require a higher Threshold level

in all presets.

The MUTE parameter allows you to mute the output of the MultiValve.

This feature is especially useful when changing guitars during a live set.

When the MultiValve is muted, front panel controls are disabled.

However, a MIDI program change will disable the mute (mute = out) and

execute the program change.

The MUTE parameter can be assigned to a MIDI controller number for

use with a MIDI device (such as a Rocktron All Access or Rocktron

MIDI Mate).

The DIRECT parameter determines whether the direct signal is

switched in or out of the signal path. When using the MultiValve in

applications where the unit is connected in parallel, it is recommended

that the direct signal is switched out - thereby providing 100% wet

(effect) output.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

No comments

Rocktron MultiValve User Manual Page 18