Rocktron REPLIFEX User Manual download pdf (Page 10)

Rear Panel Description

6 MIDI IN/REMOTE jack

This 7-pin DIN connector must be connected to the MIDI OUT

jack of the transmitting MIDI device via a standard MIDI cable, or

to the MIDI THRU jack of the preceding MIDI device (if the

Replifex

™

is within a chain of MIDI devices). Pins 6 and 7 of this

connector carry phantom power to power a Rocktron MIDI foot

controller when a 7-pin MIDI cable is used.

This connector is also provided for the connection of a Rocktron

All Access

™

MIDI footswitch, which can be configured as a

dedicated remote footswitch for the Replifex

™

. This feature allows

the user to access Replifex

™

functions and parameters via the

remote footswitch.

7 MIDI THRU/OUT jack

This standard 5-pin DIN connector can be connected to the MIDI

IN jack of another device via a standard MIDI cable. There are

limitations to the number of devices that can be chained (or series

connected) in this fashion.

Note: Inherently in MIDI there is a limit to the number of devices which

can be chained together (connected in series). With more than 3 devices,

a slight distortion of the MIDI signal can occur (due to signal degradation)

which can cause an error in MIDI signal transmission. Should this prob-

lem arise, a MIDI Thru box can be used which connects directly to the

MIDI device which transmits MIDI information and has multiple connec-

tors for the multiple devices receiving MIDI. MIDI cables should not

exceed 50 feet (15 meters) in length.

8 POWER jack

This 2.5mm pin jack accepts power from the 9VAC adaptor sup-

plied with the unit.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

No comments

Rocktron REPLIFEX User Manual Page 10