Rocktron REPLIFEX User Manual download pdf (Page 9)

4. Rear Panel

1 Left and Right INPUT jacks

These ¼" mono jacks provide inputs to the left and right channels

of the Replifex

™

. When using only one input, the Right (R) jack

should be used.

2 Left and Right OUTPUT jacks

These ¼" mono jacks provide outputs from the left and right

channels of the Replifex

™

When using a mono input (Right channel INPUT jack) and a mono

output (either OUTPUT jack), the left and right effected signals

will be summed at the single output.

3 Tap Delay/Rate FOOTSWITCH jack

This ¼" mono jack is provided for the connection of a momentary

footswitch to control the Tap Delay feature of the Replifex

™

4 CHANNEL SWITCH jack

This ¼" stereo jack can be connected to the channel switching

footswitch jack on an amplifier or preamp. This allows for pro-

grammable channel switching directly from the Replifex

™

5 PHANTOM POWER jack

This 2.5mm PIN jack offers the ability to power Rocktron MIDI

foot controllers from a 7-pin MIDI cable which connects from the

Rocktron MIDI foot controller to the MIDI IN jack on the rear

panel of the Replifex

™

. This eliminates the need to find an AC

outlet near where the footpedal would be placed during a perfor-

mance, or the need to run an extension cord out to the footswitch.

Instead of inserting the AC adaptor into the "POWER" jack of the

footswitch as you would normally, plug it into the "PHANTOM

POWER" jack on the Replifex

™

. This will power the Rocktron

MIDI foot controller through pins 6 and 7 of the MIDI cable

connecting the two units. A 7-pin MIDI cable must be used and is

available from your Rocktron dealer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 75 76

No comments

Rocktron REPLIFEX User Manual Page 9