Rocktron REPLIFEX User Manual download pdf (Page 52)

Program Changes

Step 1

To access MIDI Program Mapping, turn the FUNCTION SELECT control clockwise until the

Replifex

™

displays "PROGRAM CHANGES".

Program Changes allow for different MIDI program numbers to be assigned to Replifex



preset

numbers. For example, MIDI program #58 can be mapped to Replifex



preset #34. Then, when program

#58 is selected from a MIDI transmitting device (such as a Rocktron All Access



foot controller), preset

#34 will be recalled on the Replifex



The Program Changes Map table is shipped from Rocktron at a one-to-one correspondance (i.e. MIDI

program #1 is mapped to Replifex



preset #1, 2 to 2, 3 to 3, etc.).

4,83,7 12,5,6

Step 2

Turn the PARAMETER SELECT control one step clockwise to display the current Program

Change On/Map/Off status.

PROGRAM CHANGES

PROG CHANGES ON

Program Changes status options

ON - Execute MIDI program changes as received by a MIDI controller

MAP - Use mapping table when a program change is received

OFF - Do not execute MIDI program changes

Step 3

Turn the PARAMETER ADJUST control to select the desired Program Changes status

setting.

PROG CHANGES MAP

Step 4

Press the STORE button to save the status selection. "STORED" will flash briefly on the

display.

STORED

Operating the Replifex

™

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 75 76

No comments

Rocktron REPLIFEX User Manual Page 52