Rocktron EN50082-1 User Manual download pdf (Page 21)

The Voice/Dly function is available in configurations which include chorus or pitch shift effects. An individual Voice/Dly

function is provided for each chorus or pitch shift voice that the configuration provides—thus allowing each chorus or pitch

shift voice to be configured independently. Alternatively, any of the voices provided by a given configuration's Voice/Dly

functions can be used as a delay-only voice, either by turning the Depth parameter to "0" (in a chorus configuration) to

disable the chorus effect, or by setting the Pitch and Fine parameters to "0" (in a pitch shift configuration) to disable the

pitch shift effect.

VOICE/DLY Function

CHORUS

The Chorus effect is achieved by using one or more delayed signals, detuning these

delayed signals (slightly changing their pitch) then

modulating

this detune effect so that the

amount of pitch detune is constantly varying. Using many delayed signals at different delay

lengths - as well as using different detune amounts, modulation rates and modulation depths

for each delayed signal - results in a rich, spacious stereo chorused signal.

Chorus Voice/Dly Parameters

Parameter Description

LEVEL

This parameter adjusts the volume of the delayed signal relative to the

other voice(s) of the effect and is included in the parameter list for each

voice (or each delay signal) of both the 8-Voice and 4-Voice Chorus

effects. (This level control is not the same as the Chorus Level found in

the Mixer function parameter list.)

PAN

The Pan parameter allows you to pan each voice (or delay) of the

chorused signal to the left or right channel. This parameter is adjustable

from 0 to 100 - where 0 = full left, 100 = full right and 50 = center.

DELAY

The Delay parameter determines the delay time (in milliseconds) for

each tap of the chorus signal. It is this delayed signal that is detuned

and modulated to produce the chorus effect. Using shorter delay times

for this effect produces a tighter sounding chorused signal, while using

longer delay times will achieve a much larger, ambient effect.

DEPTH

The Depth parameter adjusts the amount of modulation of each delayed

signal. A lower depth setting will produce a more subtle detune effect

while a higher setting of this control will cause a more drastic detuning of

the delayed signal.

RATE

The Rate parameter determines the sweep speed for the delayed signal

(i.e. the speed at which the delayed signal is modulated). Here a low

rate results in a slow speed and a higher rate results in a faster speed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

No comments

Rocktron EN50082-1 User Manual Page 21