Rocktron EN50082-1 User Manual download pdf (Page 46)

This entire process is repeated 7 times for a total of 8 controllers (NUMB2, NUMB3, etc.). To exit

Controller Assign at any time, turn the PRESET or FUNCTION SELECT controls. Only those

changes that have been stored will be saved after exiting Controller Assign.

Also, a lower limit may be selected which is greater than the upper limit. This will invert the

response of the controller. For example, the toe position of an expression pedal would provide the

minimum value while the heel position would provide the maximum value.

Step 11

Turn the PARAMETER SELECT control for the last parameter - Controller Lower Limit.

LLIM C1 XXX

Step 12

Use the PARAMETER ADJUST control to select the parameter value which the controller

is not to fall below.

LLIM C1 -10.0

After choosing a lower limit parameter value, press the STORE button to save it.

"STORED" will flash briefly on the display.

Step 13

STORED

Notes

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 57 58

No comments

Rocktron EN50082-1 User Manual Page 46